-
March 28th, 2000, 02:49 AM
#1
Inactive Member
I've heard from someone that a to slipery oil in the tranny can be bad for it... what do you think?
-
March 28th, 2000, 08:21 AM
#2
Senior Hostboard Member
I run Redline MTL in my transmission... not a problem so far.
------------------
'93 Civic Si H/B with B18C1, JRSC @ 8psi
Best 1320: 12.68 at 110 mph
-
March 28th, 2000, 01:57 PM
#3
HB Forum Owner
I run Redline MTL and have no complaints. Much improved over the regular stuff.
------------------
Find out how you can make $150-200 a month, just for surfing the net!!!
VTeCno's Get Paid to Surf Site!
------------------
Cool car stuff, at a great price!
GroupBuyCenter.com
-
March 28th, 2000, 04:03 PM
#4
Inactive Member
i have ran it in my tranny for 3 years with no problems. Make sure you buy MTL and you will be fine.
k
------------------
Project Dark Side is Here!!!
JRSC 8psi, Walbro HP pump, MSD BTM, J&S, STR rail, etc...
[This message has been edited by redline (edited March 28, 2000).]
-
March 29th, 2000, 04:13 AM
#5
Inactive Member
I recently picked up a slightly used dirt bike (KDX 220). It had no owners manual, so I asked the guy at the M/C store what to put in the tranny. Usually they take 30w, just like a car's manual transmission. He said 80 to 90w BelRay gear oil. I told him he was full of it, so he took me out back to the shop, and they all agreed. They said it was the best stuff for clutch-less shifting.
Anybody out there hear of using this stuff?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks